Legacy projector brands in India: the serviceability picture
Short answer: InFocus, Mitsubishi, and Eiki projectors are no longer sold actively in India, but thousands of units remain in service in schools, government offices, temples, and community halls. These units are fully repairable at component level — the challenge is sourcing lamps, not the repair itself. Across our 5k+ projector repairs, we have serviced all three brands. The lamp situation is nuanced: some codes are still findable; others have been exhausted globally. This post covers the current India serviceability picture, brand by brand.
InFocus projectors in India
Brand history and India market context
InFocus was an early-entry projector brand in India, popular in corporate and education segments through the late 1990s and 2000s. The brand exited India's mainstream retail market around 2016. Units still in service in India include the IN1014, IN2114, IN2116 (DLP), and IN3118HD. InFocus used its own SP-series lamp codes for some models and sourced from standard UHP lamp OEMs for others. For our full InFocus projector service details, see the brand page.
InFocus lamp availability in India
Lamps for the IN1014 (SP-LAMP-069), IN2114 (SP-LAMP-069), and IN3118HD (SP-LAMP-076) are currently available through specialist AV parts importers in India, though stock levels are declining. Older codes — SP-LAMP-016 (IN32), SP-LAMP-037 (IN76), SP-LAMP-055 (IN1100) — are very difficult to source in India and may require international import with a 3 to 4 week lead time. If your InFocus unit uses SP-LAMP-016 or SP-LAMP-037, repair viability depends on whether a lamp can be sourced — call before bringing the unit in.
InFocus repair patterns
InFocus DLP projectors (IN series) follow the same DLP fault pattern as Optoma and Acer: lamp failure, colour wheel bearing wear, power-board capacitor aging. InFocus units are single-chip DLP and the chassis disassembly is straightforward. Colour wheel replacement: ₹2,000 to ₹4,500. Capacitor repair: ₹1,200 to ₹3,000. Lamp (where available): ₹2,500 to ₹5,500.
Mitsubishi projectors in India
Brand history and India market context
Mitsubishi's Visual and Imaging Systems (VIS) division sold projectors in India primarily through corporate and government channels before the brand exited the global projector market in 2015. Common India models include the XD200U, XD206U, XD221U (DLP), HC7000 (home cinema DLP), and XL7U (3LCD). Mitsubishi uses VLT-series (Very Large Technology) lamp codes.
Mitsubishi lamp and parts availability
VLT-series lamps for relatively recent models (VLT-EX320LP for XD220U, VLT-HC7000LP for HC7000) are still available through specialist projector parts importers in India, though availability varies by stockist. Older codes — VLT-XD206LP (XD206U), VLT-XD200LP (XD200U), VLT-XD221LP (XD221U) — are approaching import-only availability. Board parts are not available through any channel in India and require a component-level repair approach (sourcing individual semiconductors and capacitors) rather than board replacement. This is actually an advantage: our engineers repair Mitsubishi boards at component level rather than swapping boards, which means the repair cost is substantially lower than a swap-based approach. Full details on our Mitsubishi projector service page.
Eiki projectors in India
Brand history and India market context
Eiki projectors were sold in India through school and government channels during the 2000s and early 2010s. Eiki is a Japanese brand (a subsidiary of Elmo) with a strong AV integration heritage. Common India models include the LC-XB40, LC-XG400, LC-SB21, and EIP-HDT30. Eiki uses ELMP-series and POA-series (OEM-shared with Sanyo and Eiki Japan) lamp codes.
Eiki lamp availability
Eiki lamps are among the hardest to source in India because Eiki never built a mass-market retail channel here. ELMP-41 (LC-XB40), 610-330-7329 (EIP-HDT30), and 610-325-2957 (LC-XG400) are available through specialist AV importers with a 2 to 3 week lead time for import. We strongly recommend calling ahead with your model number and lamp code — we will confirm availability before you bring the unit to our Secunderabad workshop or before we visit your location.
Eiki repair patterns
Eiki projectors are 3LCD units (using Sanyo optical block technology in many models). Their fault pattern mirrors Epson and Hitachi: lamp failure, LCD panel polariser degradation, and power-board capacitor aging. Eiki chassis are mechanically well-made and hold up well under component-level repair. The main challenge after lamp availability is sourcing polariser films specific to Sanyo/Eiki optical blocks. Our Hitachi projector service guide provides context on 3LCD fault patterns that apply directly to Eiki units.
Repair versus replace: the honest assessment
For all three legacy brands, the repair-vs-replace decision follows a consistent logic:
Repair is viable when: a genuine or high-quality OEM-equivalent lamp can be sourced; the fault is limited to the lamp, capacitors, or colour wheel; and the unit is under 12 years old.
Replace is better when: a lamp cannot be sourced at any price or import lead time; the optical block needs full LCD panel replacement and panels are unavailable; or the combined cost of lamp plus the presenting fault exceeds ₹12,000 on a unit that cost under ₹40,000 new. We make this assessment at the ₹149 doorstep diagnosis visit before any parts are ordered or any work begins. No Fix No Fee applies to all legacy brand diagnostics.
A note from the PRW Engineer Team
The most common mistake with legacy projector brands is assuming the unit is irrepairable because authorised service is unavailable. Most of the InFocus, Mitsubishi, and Eiki units we see on the bench have straightforward lamp or capacitor faults that are fully repairable. The lamp sourcing step takes longer than for active brands, but the repair quality is identical. We have been servicing legacy projectors alongside current brands since 2007 — the diagnostic skill does not change, only the parts-sourcing logistics.